Dell EMC PowerEdge R750 - Installing the M.2 SSD Module

Figure 52. Removing the M.2 SSD module
a. module connector (2)
b. screws (2)
c. module (2)
Next steps
Installing the M.2 SSD module.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
Steps
1. Align the M.2 SSD module connectors with the connectors on the BOSS card.
2. Push the M.2 SSD module until the module is seated firmly on the BOSS card.
3. Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
Installing and removing system components
55