Table 7. Rear view of the system with no rear drives
Item Ports, panels, or slots Icon Description
9 Ethernet ports (2) The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
10 USB 3.0 port (2) These USB ports support USB 3.0.
11 iDRAC dedicated port
Enables you to remotely access iDRAC. For more information, see
the iDRAC User’s Guide at www.dell.com/poweredgemanuals.
12 VGA port Enables you to connect a display device to the system.
13 System status indicator
cable port (CMA)
N/A Enables you to connect the status indicator cable and view system
status when the CMA is installed.
14 System identification
button
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
For more information about the ports, panels and connectors see the Dell EMC PowerEdge R7515 Technical Specifications.
System overview
15
To Next Page
Loading...
