Dell EMC PowerEdge T440 - Installing an Expansion Card

Figure 63. Removing an expansion card
Figure 64. Installing the ller bracket
Next steps
1 Follow the procedure listed in After working inside your system.
2 Install an expansion card.
3 Install the expansion card holder.
4 Install the air shroud.
Related link
Removing the air shroud
Removing the expansion card holder
Installing an expansion card
Installing the expansion card holder
Installing the air shroud
Installing an expansion card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Remove the air shroud.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
117