Dell EMC PowerEdge T440 - Locating the Service Tag of Your System

4 Once the tests have been completed, you can view the results and additional information on the Results tab, the System Health tab,
the Conguration tab, and the Event Log tab.
5 Close the Embedded System Diagnostics utility.
6 To leave the diagnostics, click Exit.
7 Click OK when prompted, and the system reboots.
Running the Embedded System Diagnostics from the Dell Lifecycle
Controller
To run the embedded system diagnostics from the Dell Lifecycle Controller:
1 As the system boots, press F10.
2 Select Hardware Diagnostics → Run Hardware Diagnostics.
Locating the Service Tag of your system
You can identify your system using the unique Express Service Code and Service Tag. Pull out the information tag in front of the system to
view the Express Service Code and Service Tag. Alternatively, the information may be on a sticker on the chassis of the system. The mini
28
Dell EMC PowerEdge T440 Installation and Service Manual
Diagnostic indicators