Figure 27. Removing 2.5 inch drive from a 3.5 inch drive adapter
Next step
Install a 2.5 inch drive into a 3.5 inch drive adapter.
Related link
Removing a 3.5 inch drive adapter from a 3.5 inch drive carrier
Installing a 2.5 inch drive into a 3.5 inch drive adapter
Installing a 2.5 inch drive into a 3.5 inch drive adapter
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the screw holes on the 2.5 inch drive with the screw holes on the 3.5 inch drive adapter.
2 Using the Phillips #2 screwdriver, secure the 2.5 inch drive to the 3.5 inch drive adapter.
Installing and removing system components
79
To Next Page
Loading...
