Dell EMC VEP4600 - Configure BIOS and Install RHEL os; Configure BIOS to Boot from USB

Configure BIOS and Install RHEL OS
Topics:
• Configure BIOS to Boot From USB
• Install Red Hat OS
• Start Red Hat OS installation
• Configure BIOS to boot from SSD
Configure BIOS to Boot From USB
1. Boot the VEP4600 into the BIOS and tab to the Boot menu. For more information on how to access the BIOS, see VEP4600 Start up
and serial console.
2. Select the Advanced tab. Select CSM Configuration and press Enter.
CSM Configuration
CSM support enabled
3. Use UEFI to install the Red Hat OS.
4. Select the Boot menu tab.
5. Highlight the UEFI USB Drive BBS Priorities option using the left and right arrows and press Enter.
9
34 Configure BIOS and Install RHEL OS