22 EMC VNXe3100 Hardware Information Guide
Overview
• Four-port 1-Gb/s copper Ethernet I/O personality module
• Two (RJ-45) LAN connectors (labeled with a network management symbol and a
wrench symbol)
Note: The RJ-45 LAN connector with a wrench symbol is not used at this time.
• Two (micro DB-9) RS-232/EIA connectors (labeled with a battery symbol and a
wrench symbol)
Note: The DB-9 connector with a battery symbol is not used at this time.
•SP status LEDs
• RS-232/EIA
• SP latch handles (top of SP left and right)
To Next Page
Loading...
