Dell EMC VxFlex Series - Page 33

Note
The parameter option of Lockdown Mode must be Disabled. If it is not,
change it. To change the parameter option from Enable to Disable , click Edit
in the Lockdown Mode pane and change the parameter value to Disable .
5. Configure the SSH parameter:
a. In the vSphere Web Client screen, under Manage menu, select Settings >
System > Security Profile.
System-defined parameter panes such as Services and Lockdown Mode,
with predefined parameter options, are displayed in the work area.
b. Scroll down to access the Services pane and verify the SSH option.
Note
SSH must be Running (that is, the SSH connection is established). If SSH is
Stopped, you must change it to Running.
c. To change SSH option to Running:
a. Click Edit in the Services pane.
b. In the Edit Security Profile screen, select the SSH parameter.
The SSH status is Stopped .
c. Click Start.
The SSH status changes to Running .
For SSH status as Stopped , Start is active and Stop is grayed out.
d. Click OK.
The SSH status changes to Running .
6. Restart the management service or restart the server.
Installing the Operating System
Prepare ESXi servers for deployment 33