Dell EMC VxRail E560 Series - Page 35

NOTE: The expansion card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 42. Riser configurations: 1A + 2A (E560/E560F - 2 CPU)
Card type Slot priority
(Systems shipped before
December 10, 2019)
Slot priority
(Systems shipped on
or after December 10,
2019)
Form factor
HWRAID BOSS 1 2 Low Profile
PCIe Devices (NIC, GPU and FC
HBA)
2, 3 1, 3 Low Profile
HBA330 Mini Integrated Slot Integrated Slot N/A
rNDC Integrated Slot Integrated Slot N/A
Table 43. Riser configurations: 1A + 2A (E560N All NVMe)
Card type Slot priority Form factor
HWRAID BOSS 2 Low Profile
PCIe Devices (NIC, GPU and FC HBA) 3 Low Profile
HBA330 Mini Integrated Slot N/A
rNDC Integrated Slot N/A
NOTE: For the 1A + 2A E560N All NVMe riser configuration, slot 1 is dedicated to the PCIe bridge card.
Table 44. Riser configurations: 1A (E560/E560F - 1 CPU)
Card type Slot priority
(Systems shipped before
December 10, 2019)
Slot priority
(Systems shipped on
or after December 10,
2019)
Form factor
HWRAID BOSS 1 2 Low Profile
PCIe Devices (NIC, GPU and FC
HBA)
2 1 Low Profile
HBA330 Mini Integrated Slot Integrated Slot N/A
rNDC Integrated Slot Integrated Slot N/A
Replacing and adding hardware 35