Dell EqualLogic PS-M4110 - Using the Group Manager GUI to Set the RAID Policy

42
Dell EqualLogic PS-M4110 Installation Guide
Chapter 4 Configuring the Array
Using the Group Manager GUI to Set the RAID Policy
For information about browser support for the Group Manager GUI, see the latest EqualLogic PS Series Release
Notes.
To use the GUI to set the RAID policy for a member:
1. Log in to the group by entering the group IP address in a Web browser. Then, in the login dialog box (Figure
21), enter the grpadmin account name and the password that you specified when creating the group.
Figure 21: Group Manager GUI Login
2. In the Group Summary window (Figure 22), expand Members in the far left panel and select the member
name.