80 Installing System Components
Figure 3-15. Removing and Installing an iDRAC6 Enterprise Card
7
If applicable, reinstall the expansion card. See "Installing an Expansion
Card" on page 62.
8
Close the system. See "Closing the System" on page 51.
9
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1 iDRAC6 Enterprise card 2 VFlash media slot
3 VFlash SD card 4 retention standoff posts (2)
5 retention standoff tabs (2) 6 iDRAC6 Enterprise card connector
book.book Page 80 Monday, March 7, 2011 2:24 PM
To Next Page
Loading...
