850 | Quality of Service
www.dell.com | support.dell.com
Create an input QoS policy c e s Ingress
Configure policy-based rate policing c e s
Set a DSCP value for egress packets c e s
Set a dot1p value for egress packets c e s
Create an output QoS policy c e s Egress
Configure policy-based rate limiting e
Configure policy-based rate shaping c e s
Allocate bandwidth to queue c e s
Specify WRED drop precedence e
Create Policy Maps c e s Ingress + Egress
Create Input Policy Maps c e s Ingress
Honor DSCP values on ingress packets c e s
Honoring dot1p values on ingress packets e c s
Create Output Policy Maps c e s Egress
Specify an aggregate QoS policy c e s
QoS Rate Adjustment c e s
Strict-priority Queueing c e s —
Weighted Random Early Detection e Egress
Create WRED Profiles e
Configure WRED for Storm Control e
Allocating Bandwidth to Multicast Queues e Egress
Pre-calculating Available QoS CAM Space c e s —
Viewing QoS CAM Entries e —
Table 41-1. FTOS Support for Port-based, Policy-based, and Multicast QoS Features (continued)
Feature Platform Direction
To Next Page
Loading...
