86 | 802.1ag
www.dell.com | support.dell.com
• MIP Database (MIP-DB): Every MIP must maintain a database of all other MEPs in the MA that
have announced their presence via CCM
MP Database Persistence
Task Command Syntax Command Mode
Display the MEP Database.
show ethernet cfm maintenance-points remote detail [active
| domain {level | name} | expired | waiting]
EXEC Privilege
FTOS#show ethernet cfm maintenance-points remote detail
MAC Address: 00:01:e8:58:68:78
Domain Name: cfm0
MA Name: test0
Level: 7
VLAN: 10
MP ID: 900
Sender Chassis ID: FTOS
MEP Interface status: Up
MEP Port status: Forwarding
Receive RDI: FALSE
MP Status: Active
Display the MIP Database.
show ethernet cfm mipdb
EXEC Privilege
Task Command Syntax Command Mode
Set the amount of time that data
from a missing MEP is kept in
the Continuity Check Database.
database hold-time minutes
Default: 100 minutes
Range: 100-65535 minutes
ECFM DOMAIN
To Next Page
Loading...
