Dell Force10 MXL Blade - Page 172

170 | Dynamic Host Configuration Protocol (DHCP)
www.dell.com | support.dell.com
To display DHCP client information, enter the following show commands:
Figure 9-6. show ip dhcp client statistics
Figure 9-7. show ip dhcp lease
Task Command Syntax Command Mode
Display statistics about DHCP client interfaces
(Figure 9-6).
show ip dhcp client statistics
interface type slot/port
EXEC Privilege
Clear DHCP client statistics on a specified or on all
interfaces.
clear ip dhcp client statistics {all |
interface type slot/port}
EXEC Privilege
Display lease information about the dynamic IP address
currently assigned to a DHCP client interface (Figure 9-7).
show ip dhcp lease [interface type
slot/port]
EXEC Privilege
FTOS# show ip dhcp client statistics interface tengigabitethernet 0/1
Message Received
DHCPOFFER 0
DHCPACK 0
DHCPNAK 0
Message Sent
DHCPDISCOVER 0
DHCPREQUEST 0
DHCPDECLINE 0
DHCPRELEASE 0
DHCPREBIND 0
DHCPRENEW 0
FTOS# show ip dhcp lease interface tengigabitethernet 4/37
Interface Lease-IP Def-Router ServerId State Lease Obtnd At Lease Expires At
====== ========= ========= ======== ====== ============== ===========
Te 4/37 189.17.9.2/30 0.0.0.0 189.17.9.1 BOUND 06-12-2012 07:35 01-18-2038 11:14
Renew Time Rebind Time
========== ========
09-05-2023 04:56 11-06-2034 13:46