Dell Force10 MXL Blade - Page 544

544 | Security
www.dell.com | support.dell.com
password-attributes
Configure the password attributes (strong password).
Syntax
password-attributes [min-length number] [max-retry number] [character-restriction [upper
number] [lower number] [numeric number] [special-char number]]
To return to the default, use the no password-attributes [min-length number] [max-retry number]
[character-restriction [upper number] [lower number] [numeric number] [special-char number]]
command.
Parameters
Defaults
none
Command Modes
CONFIGURATION
Command
History
Related
Commands
radius-server key Configures a key for all RADIUS communications between the switch and the
RADIUS host server.
tacacs-server key Configures a key for communication between a TACACS+ server and client.
username Establishes an authentication system based on user names.
min-length number
(OPTIONAL) Enter the keyword min-length followed by the number of
characters.
Range: 0 - 32 characters
max-retry number
(OPTIONAL) Enter the keyword max-retry followed by the number of
maximum password retries.
Range: 0 - 16
character-restriction
(OPTIONAL) Enter the keyword character-restriction to indicate a
character restriction for the password.
upper number
(OPTIONAL) Enter the keyword upper followed the upper number.
Range: 0 - 31
lower number
(OPTIONAL) Enter the keyword lower followed the lower number.
Range: 0 - 31
numeric number
(OPTIONAL) Enter the keyword numeric followed the numeric number.
Range: 0 - 31
special-char number
(OPTIONAL) Enter the keyword special-char followed the number of
special characters permitted.
Range: 0 - 31
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
password Specifies a password for users on terminal lines.