Dell Force10 Z9000 - Page 296

296 | Z-Series Debugging and Diagnostics
www.dell.com | support.dell.com
The Z9000 supports 32 40G ports or 128 10G ports on four port-pipes, which are also called units. The
system displays internal port numbers, not the external port numbers that you will see. See the following
table for information that maps the internal unit port number with the port-pipe unit for the 40G
(highlighted lines only) and 10G ports (all lines).
Table 12-3. Cross-reference of internal port numbers to user port numbers
Internal Unit
Port
Number
User Ports 0
to 31 on Unit
0
User Ports
32 to 63 on
Unit 1
User Ports
64 to 95 on
Unit 2
User Ports
96 to 127 on
Unit 3
No User
Ports on
Unit 4
No User
Ports on
Unit 5
1 0 32 64 96 Internal Internal
2 1 33 65 97 Internal Internal
3 2 34 66 98 Internal Internal
4 3 35 67 99 Internal Internal
5 4 36 68 100 Internal Internal
6 5 37 69 101 Internal Internal
7 6 38 70 102 Internal Internal
8 7 39 71 103 Internal Internal
9 8 40 72 104 Internal Internal
10 9 41 73 105 Internal Internal
11 10 42 74 106 Internal Internal
12 11 43 75 107 Internal Internal
13 12 44 76 108 Internal Internal
14 13 45 77 109 Internal Internal
15 14 46 78 110 Internal Internal
16 15 47 79 111 Internal Internal
17 16 48 80 112 Internal Internal
18 17 49 81 113 Internal Internal
19 18 50 82 114 Internal Internal
20 19 51 83 115 Internal Internal
21 20 52 84 116 Internal Internal
22 21 53 85 117 Internal Internal
23 22 54 86 118 Internal Internal
24 23 55 87 119 Internal Internal
25 24 56 88 120 Internal Internal
26 25 57 89 121 Internal Internal