Dell Force10 Z9000 - Show Vlan Private-Vlan Mapping; Switchport Mode Private-Vlan

Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
C-Series, S-Series
Syntax
show vlan private-vlan mapping
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
The output of this command, shown below, displays the community and isolated VLAN IDs that
are associated with each primary VLAN.
Example
FTOS# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
C-Series, S-Series, Z-Series, S4810
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
1164