Dell Force10 Z9000 - Page 177

• EXEC Privilege
Command History
Version 8.3.11.4 The brief parameter no longer displays the current Reload mode.
To display Reload mode, use the show reload-type command.
Modified the
show system stack-unit command output to
support Piece Part ID (PPID).
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and
newer, while older boot codes display as "Present".
Version 7.7.1.0 Added Master Priority field.
Version 7.6.1.0 Introduced on the S-Series.
Example
FTOS#show system brief
Stack MAC : 0:1:e8:d6:4:70
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------
----------
--
0 Member not present
1 Standby online S50V S50V 7.7.1.0 52
2 Mgmt online S50V S50V 7.7.1.0 52
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
-- Module Info --
Unit Module No Status Module Type Ports
---------------------------------------------------------------
----------
--
1 0 online S50-01-10GE-2P 2
1 1 online S50-01-24G-2S 1
2 0 online S50-01-10GE-2P 2
2 1 online S50-01-24G-2S 1
-- Power Supplies --
Unit Bay Status Type
---------------------------------------------------------------
----------
--
1 0 up AC
1 1 absent
Example (Z9000)
ct-z9000-2#show system stack-unit 0
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : Z9000 - 32-port TE/FG (ZB)
Current Type : Z9000 - 32-port TE/FG (ZB)
Master priority : 0
177