Dell Force10 Z9000 - Clear Ip Bgp Dampening

flap-statistics Enter the keywords flap-statistics to clear the flap statistics
information.
ipv4 Enter the ipv4 address family to clear.
ipv6 Enter the ipv6 address family to clear.
peer-group Enter the peer-group to clear all members of the peer-group.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 6.5.1.0 Expanded to include the as-number option.
Related
Commands
bgp recursive-bgp-next-hop – disables next-hop resolution through other routes learned by the
BGP.
bgp soft-reconfig-backup – turns on BGP Soft Reconfiguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
ip-address mask (OPTIONAL) Enter an IP address in dotted decimal format and the
prefix mask in slash format (/x) to clear dampening information only
that BGP neighbor.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
After you enter this command, the software deletes the history routes and returns the
suppressed routes to the Active state.
349