show ip bgp ipv4 extcommunity-list
Use this feature to display the IPv4 routes matching the extended community list name.
C-Series, E-Series, S-Series, Z-Series
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast]
extcommunity-list name
Parameters
multicast Enter the keyword multicast to display the multicast route
information.
unicast Enter the keyword unicast to display the unicast route information.
ipv6 unicast Enter the keywords ipv6 unicast to display the IPv6 unicast
route information.
name
(OPTIONAL) Enter the name of the extcommunity-list.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
Usage
Information
If there is a type or sub-type that is not well-known, it is displayed as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the value divided
into 2-byte and 4-byte values in decimal format. This format is consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20 00 00 00 10 00,
it displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Example
FTOS#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100,
Weight 0,
external
Communities :
300:400 500:600
Extended Communities :
RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:37:50529044
451
To Next Page
Loading...
