Steps
1. Open the latch and connect the I/O board cable to the system board and close the latch.
2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3. Install the two screws (M2x4) that secure the I/O board to the palm-rest and keyboard assembly.
Next steps
For computers shipped with NVIDIA GeForce RTX 3060
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Installing the I/O board - shipped with M.2 connector
About this task
The following image indicates the location of the I/O board on computers shipped with NVIDIA GeForce RTX 3050, and
NVIDIA GeForce RTX 3050 Ti and provides a visual representation of the removal procedure.
Removing and installing components
33
To Next Page
Loading...
