3. Connect the light bar cable to its connector on the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Identifier GUID-39973F09-265E-45B1-8DC7-BB1C951C625D
Status Released
Front cover
Identifier GUID-8A522B68-98BC-430D-BBC0-C06668823D85
Status Released
Removing the front cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the front cover and provides a visual representation of the removal procedure.
Steps
1. Place the computer in an upright position.
Removing and installing components
17
To Next Page
Loading...
