Next steps
1. Install the 3.5-inch hard drive.
2. Install the left-side cover.
3. Follow the procedure in After working inside your computer.
Identifier GUID-1C622BA0-DC4F-4B77-8AD0-153BD9C5F567
Status Released
Solid-state drive/Intel Optane
Identifier GUID-0F45212A-7635-49C0-B9CD-C7E4D90E3EC8
Status Released
Removing the solid-state drive/Intel Optane
Prerequisites
NOTE: You need to disable the Intel Optane memory before removing Intel Optane from your computer. For more
information about disabling the Intel Optane memory, see Disabling Intel Optane.
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the graphics card.
About this task
The following images indicate the location of the solid-state drive/Intel Optane and provides a visual representation of the removal
procedure.
Removing and installing components
31
To Next Page
Loading...
