3. Install the left-side cover.
4. Follow the procedure in After working inside your computer.
Identifier GUID-144718DC-52F6-4737-BAE2-BEE6BE85E996
Status Released
Processor fan and heat-sink assembly
Identifier GUID-F6A51655-FD8C-4150-8CBF-78BAF14A762A
Status Released
Removing the processor fan and heat-sink assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the left-side cover.
About this task
The following images indicate the location of the processor fan and heat-sink assembly and provides a visual representation of the removal
procedure.
Removing and installing components
43
To Next Page
Loading...
