Dell Inspiron 1012 - Removing the Battery; Replacing the Battery

Great user manuals database on UserManuals.info
Back to Contents Page
 Battery
Dell™Inspiron™1012ServiceManual
Removing the Battery
Replacing the Battery



Removing the Battery

1. Follow the procedures in Before You Begin.

2. Turn the computer over.

3. Slide the battery release latches to the unlock position.

4. Rotate and lift the battery out of the battery bay.
Replacing the Battery

Align the tabs on the battery with the slots in the battery bay and gently press the battery until it clicks into place.
Back to Contents Page

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
1
battery
2
battery release latches (2)
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer.