5. Slide and remove the wireless card off the M.2 card slot on the system board.
Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the installation
procedure.
Steps
1. Align the notch on the wireless card with the tab on the M.2 card slot on the system board.
2. Slide the wireless card into the M.2 card slot on the system board.
Table 2. Antenna-cable color scheme
Removing and installing components 21
To Next Page
Loading...
