Replacing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
Procedure
1. Align the base cover with the palm-rest assembly and snap it into place.
2. Replace the nine screws (M2.5x7) that secure the base cover to the palm-rest assembly.
4
Replacing the base cover 13
To Next Page
Loading...
