Removing the palm-rest assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the coin-cell battery.
5. Remove the solid-state drive.
6. Remove the wireless card.
7. Remove the fan.
8. Remove the touch pad.
9. Remove the display assembly.
10. Remove the heat sink.
11. Remove the I/O board.
12. Remove the power-adapter port.
13. Remove the power and volume-buttons board.
14. Remove the status light board.
15. Remove the speakers.
16. Remove the system board.
17. Remove the keyboard.
Procedure
After performing the steps in prerequisites we are left with the palm rest.
37
66 Removing the palm-rest assembly
To Next Page
Loading...
