Removing the display panel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the display assembly.
Procedure
1. Remove the display cable from the routing guides inside the hinge covers.
2. Using a plastic scribe, pry the display-panel assembly off the display back-cover and antenna assembly.
Figure 32. Removing the display panel
1.
plastic scribe 2. display back-cover
3. routing guides 4. display cable
39
Removing the display panel 69
To Next Page
Loading...
