Removing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the memory modules.
5 Remove the wireless card.
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 8 in “Removing the palm rest".
8 Follow the procedure from step 1 to step 6 in “Removing the system
board".
9 Follow the procedure from step 1 to step 3 in “Removing the heat sink”.
Procedure
1 Remove the screws that secure the fan to the cooling assembly.
63
To Next Page
Loading...
