Removing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Turn the computer over and slide the battery latch to the unlock position. You
can hear a click sound when the battery is unlocked.
2 Using your fingertips, lift the battery at an angle and remove the battery off the
computer base.
3 Turn the computer over, open the display, and press the power button for five
seconds to ground the system board.
15
To Next Page
Loading...
