Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the optical drive.
3 Remove the keyboard.
4 Remove the base cover.
Procedure
1 Remove the screw (M2x3) that secures the wireless-card bracket to the system
board.
2 Slide and remove the wireless-card bracket.
3 Disconnect the antenna cables from the wireless card.
4 Slide and remove the wireless card from the wireless-card slot.
41
To Next Page
Loading...
