Removing the memory module
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Locate the memory module on the system board.
2. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops
up.
3. Remove the memory module from the memory-module slot.
23
36 Removing the memory module
To Next Page
Loading...
