Dell Inspiron 14 7420 2-in-1 - Removing the M.2 2280 Solid-State Drive

To Next Page

To Previous Page

Steps

1. Align the notch on the M.2 2230 solid-state to the mounting bracket.

2. Replace the screw (M2x2) that secures the M.2 2230 solid-state drive to the mounting bracket.

3. Flip over the M.2 2230 solid-state drive and mounting bracket.

4. Slide and place the M.2 2230 solid-state drive and its mounting bracket on the system board.

5. Replace the screw (M2x3) that secures the M.2 thermal plate to the palm-rest and keyboard assembly.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Removing the M.2 2280 solid-state drive

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

Removing and installing components

Other manuals for Dell Inspiron 14 7420 2-in-1