Table 4. System setup optionsāSystem information menu (continued)
Overview
Intel Hyper-Threading Capable Displays whether the processor is Hyper-Threading (HT) capable.
64-Bit Technology Displays whether 64-bit technology is used.
MEMORY
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
Memory Channel Mode Displays single or dual channel mode.
Memory Technology Displays the technology that is used for the memory.
DIMM_SLOT1 Displays the memory configuration of DIMM SLOT1.
DIMM_SLOT2 Displays the memory configuration of DIMM SLOT2.
DEVICES
Panel Type Displays the Panel Type of the computer.
Video Controller Displays the integrate graphics information of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the Wi-Fi device installed in the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays whether a Bluetooth device is installed in the computer.
dGPU Video Controller Displays the discrete graphics controller.
Table 5. System setup optionsāBoot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of this computer.
Boot Sequence Enables or disables Windows Boot Manager and UEFI Hard Drive.
By default, Windows Boot Manager is selected
By default, UEFI Hard Drive is selected
Secure Boot
Enable Secure Boot Enables secure boot using only validated boot software.
Default: OFF
Enable Microsoft UEFI CA Enables or disables Microsoft UEFI CA in the BIOS UEFI Secure Boot DB.
Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Expert Key Management
Enable Custom Mode Allows the PK, KEK, db, and dbx security key databases to be modified.
Default: OFF
60 System setup
To Next Page
Loading...
