Steps
Place the palm-rest and keyboard assembly on a clean and flat surface.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the power button or power button with fingerprint reader.
4. Install the fan.
5. Install the heat sink.
6. Install the speakers.
7. Install the I/O board.
8. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever applicable.
9. Install the wireless card.
10. Install the memory.
11. Install the coin-cell battery.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in After working inside your computer.
Removing and installing components
51
To Next Page
Loading...
