4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the speakers.
7. Remove the power-adapter port.
8. Remove the I/O board.
9. Remove the left fan and the right fan.
10. Remove the discrete heat sink (if applicable).
11. Remove the power-button board.
12. Remove the power button with optional fingerprint reader.
13. Remove the system board.
NOTE: For configurations with integrated graphics, the system board can also be removed and installed with the heat
sink and M.2 sold-state drive attached.
14. Remove the touchpad.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Removing and installing Field Replaceable Units (FRUs) 83
To Next Page
Loading...
