Replacing the keyboard
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the keyboard cable into its connector and close the latch to secure the
cable.
2 Carefully turn the keyboard over, slide the tabs on the keyboard into the slots
on the palm-rest assembly, and snap the keyboard into place.
3 Close the display and turn the computer over.
Post-requisites
Replace the battery.
8
Replacing the keyboard 23
To Next Page
Loading...
