Removing the base cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the battery.
2 Follow the procedure from step 1 to step 3 in “Removing the optical drive”.
3 Remove the keyboard.
Procedure
1 Open the display and remove the screws that secure the palm-rest assembly
to the base cover from its connector on the system board.
2 Open the latch and disconnect the optical-drive cable from its connector on
the system board.
9
Removing the base cover 24
To Next Page
Loading...
