9 Remove the heat-sink assembly.
Procedure
1 Open the display as far as possible.
2 Open the latch and disconnect the power-button board cable from the
system board.
3 Open the latch and disconnect the touch-pad cable from the system board.
1 latch 2 power-button board cable
3 touch-pad cable 4 latch
4 Close the display and turn the computer over.
5 Remove the screw that secures the wireless-card bracket to the system board.
6 Remove the screw that secures the display hinge to the system board.
Removing the system board 64
To Next Page
Loading...
