Procedure
1 Remove the screws that secure the left display hinge to the palm-rest
assembly and open the hinge to an angle of 90 degrees.
2 Note the antenna cable routing and remove the cable from its routing guides
on the palm-rest assembly.
3 Note the display cable routing and remove the cable from its routing guides
on the palm-rest assembly.
1 display hinge 2 screws (2)
3 antenna cables (2) 4 routing guides (2)
5 display cable 6 palm-rest assembly
4 Open the palm-rest assembly.
Removing the display assembly 82
To Next Page
Loading...
