Replacing the display panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the display cable into the connector on the display back-cover and close
the latch to secure the cable.
2 Adhere the tape that secures the display cable to the display back-cover.
3 Turn the display panel over and place it on the display back-cover.
4 Align the screw holes on the display panel with the screw holes on the display
back-cover.
5 Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1 Replace the display bezel.
2 Replace the display assembly.
3 Replace the system board.
4 Replace the heat-sink assembly.
5 Replace the IO board.
6 Replace the wireless card.
7 Replace the memory module.
8 Follow the procedure from step 3 to step 5 in “Replacing the hard drive”.
40
Replacing the display panel 94
To Next Page
Loading...
