Replacing the palm rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Post-requisites
1 Replace the display assembly.
2 Replace the power-adapter port.
3 Replace the touch pad.
4 Replace the system board.
5 Replace the status-light lens.
6 Replace the fan.
7 Replace the heat sink.
8 Replace the I/O board.
9 Replace the speakers.
10 Replace the power-button board.
11 Replace the wireless card.
12 Replace the memory modules.
13 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
14 Follow the procedure from step 2 to step 8 in “Replacing the base cover”.
15 Replace the keyboard.
16 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
17 Replace the battery.
Procedure
Place the palm rest on a clean and flat surface.
110
To Next Page
Loading...
