Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Disconnect the speaker cable from the system board.
2 Disconnect the power and volume-buttons board cable and the coin-cell
battery cable from the I/O board.
3 Note the cable routing and remove the power and volume-buttons board
cable from the routing guides on the palm rest and keyboard assembly
and the speaker.
4 Note the cable routing and remove the speaker cable from the routing
guides on the palm rest and keyboard assembly.
53
To Next Page
Loading...
