Replacing the palm rest and
keyboard assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
Place the palm rest and keyboard assembly on a clean and flat surface.
Post-requisites
1 Replace the display assembly.
2 Replace the system board.
3 Replace the touch pad.
4 Replace the status-light board.
5 Replace the speakers.
6 Replace the power-adapter port.
7 Replace the power and volume-buttons board.
8 Replace the I/O board.
9 Replace the heat sink.
10 Replace the fan.
11 Replace the keyboard daughter-board.
12 Follow the procedure from step 4 to step 8 in “Replacing the hard drive”.
13 Replace the coin-cell battery.
14 Replace the wireless card.
15 Replace the memory module.
16 Replace the battery.
17 Replace the base cover.
85
To Next Page
Loading...
