Removing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the optical drive (optional).
2 Remove the base cover.
3 Remove the wireless card.
4 Remove the display assembly.
5 Remove the display bezel.
6 Remove the display panel.
Procedure
1 Remove the eight screws (M2.5x2.5) that secure the hinges to the display back-
cover and antenna assembly.
2 Remove the two screws (M2x2) that secure the hinge brackets to the display
back-cover and antenna assembly.
113
To Next Page
Loading...
