Advanced
USB Wake Support Allows you to enable USB devices to
wake the computer from standby or to
disable the USB wake support feature.
NOTE: If USB PowerShare is
enabled, a device connected to
the USB PowerShare connector
may not wake the computer.
Default: Disabled
SATA Operation Allows you to congure the operating
mode of the integrated SATA hard drive
controller.
Default: AHCI
Adapter Warnings Allows you to choose if the computer
should display warning messages when
you use AC adapters that are not
supported by your computer.
Default: Enabled
Function Key Behavior Allows you to set function key or
multimedia key as the default function
key behavior.
Default: Multimedia key
Battery Health Displays the battery health.
Miscellaneous Devices
USB Debug Enable or disable USB debug.
Default: Disabled
BIOS Recovery from Hard Drive Enable or disable BIOS recovery from
hard drive.
Default: Enabled
Battery Charge Conguration Set the battery charge settings with a
preselected custom charge start and
stop.
Default: Adaptive
132