Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the optical drive (optional).
2 Remove the base cover.
3 Remove the solid-state drive.
Procedure
1 Disconnect the speaker cable from the system board and lift the right speaker
o the palm rest and keyboard assembly.
2 Note the speaker cable routing and remove it from the routing guides on palm
rest and key board assembly.
64
To Next Page
Loading...
