Removing the display bezel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
NOTE
: These instructions are applicable only for laptops with a non-touch screen
display.
1 Remove the battery.
2 Follow the procedure from step 1 to step 3 in “Removing the optical drive”.
3 Remove the keyboard.
4 Follow the procedure from step 1 to step 5 in “Removing the base cover”.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the memory module.
7 Remove the wireless card.
8 Remove the I/O board.
9 Remove the heat-sink assembly.
10 Remove the system board.
11 Remove the display assembly.
37
Removing the display bezel 91
To Next Page
Loading...
