Adding and Replacing Parts 159
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
Removing the Optical Drive
1
Follow the procedures in "Before You Begin" on page 153.
2
Turn the computer over.
3
Remove the locking screw from the optical drive.
4
Using a plastic scribe, push the notch to release the optical drive from the bay.
5
Slide the optical drive out of the bay.
1 optical drive 2 notch
3 locking screw
2
1
3
To Next Page
Loading...
